How To Change Code On Schlage Lock Keypad. Press and hold down any number on the keypad until you hear a beep. Disarm the current door lock codes by pressing and holding the schlage button on the front of the lock until it turns green.
Slide off the battery cover. Press and release the outside schlage button. Press key 6 on the keypad.
So If You Wanted Your New User Code To Be 1234, You Would Enter In 12341234.
Enter the programming code (6 digits) again to complete the process. This will reset all of your settings, including your access code, master code and pins for each user code. Then wait for the schlage button to light orange three times, followed by three beeps.
No More Hiding Keys Under The Doormat Or Losing Track Of Copies.
As a reminder, jot down the code on a piece of paper so that you won’t forget. Press the schlage button on the keypad and press key 2. Then release it and reconnect the battery within the next 10 seconds.
Press And Release The Outside Schlage.
To open the door, users must enter a. While holding the schlage button, reattach the battery terminal. The “schlage” key will flicker and sound three to four times.
Schlage Electronic Door Security Provides An Additional Level Of Intruder Protection Compared To Standard Key Locks.
This type of lockset can store up to 19 different individual codes, permitting you to set temporary codes to. How to change the code on a schlage lock. After pressing the schlage button and entering in your programming code, press “1” and then enter in the new user code that you want to use twice.
Here Are The Simple Steps To Delete The Previous Entry Code.
Once you are done entering your programming code, the schlage button at the top of the lock will blink and beep thrice. Press the schlage button, and the keypad turns blue. To factory reset the schlage connect be468/be469 smart locks.