How To Replace Battery In Hyundai Key Fob 2017. With the key fob open, gently lift the circuit board to see the battery. Now the fob should open.
Using your key, turn your hyundai to the “acc” (accessory) position on your ignition. Carefully lift the circuit board to expose the battery. Slide in the key fob inside the opening with the side with the key holder out.
Here’s How To Program The Hyundai Key Fob:
For older fob models, use a coin or a flat blade screwdriver to pop open the key fob from the small notch or indent along the outside. Use a coin or a flat blade screwdriver to pop open the key fob from the small notch or indent along the outside. Here are the guiding steps:
Now The Fob Should Open.
Carefully lift the circuit board to expose the battery. Insert the hyundai key fob battery replacement, ensuring as you do. The only tool needed to access and replace the battery is a small flat head screwdriver or a small plastic pry bar tool.
Using Your Key, Turn Your Hyundai To The “Acc” (Accessory) Position On Your Ignition.
How to replace a hyundai key fob battery. The keyless entry fob is. Most key fobs require a cr2032.
Hold Both The “Unlock” And “Open” Boxes On Your Hyundai Key Fob.
Remember how the battery is positioned in the key fob before removing it since this is how you will place the new battery into the key fob. Then, use a coin or a flat blade screwdriver to gently pop open the key fob from the notch by turning it in either direction. Get inside your hyundai and close the doors.
Slide In The Key Fob Inside The Opening With The Side With The Key Holder Out.
Check to see the kind of battery needed. If you drive an older hyundai model, you will begin by finding a small notch or indent along the side of your key fob. Now that you have your key fob open, carefully lift the circuit board to expose the battery.